Juniper CHAS-BX7000-S,BX 7000 Chassis Spare (With Craft Interface). Power supplies not included

Juniper Networks BX7000 Multi-Access Gateway

CHAS-BT7000-S-A

                                  JUNIPER-BX7000
********************************************************************************
Application memory test: Passed
Initializing Parameter Memory ....
SIDX version R1.0
Build date  13 Nov 2008
All rights reserved (c) 2007-2008 Juniper Networks
Flash:              AMD S29GL01G
Core:               WinPath2 847-Rev-A1 Wintegra mips24k Rev 101
Board Id:           WinPath2 1
Board Rev:          6
Serial No:          XJ3085
CPLD1 Version Id:   3D
CPLD2 Version Id:   3A
FPGA Id:            55ff0000
Framer0 Id:         IDT82P2288
Framer1 Id:         IDT82P2288
GigE Switch Id:     BroadCom5396
EPHY 0 Device Id:   Broadcom BCM5482S
EPHY 1 Device Id:   Broadcom BCM5482S
USB Host Chip Id:   ISP11760
SFP 0 Id:           NOT DETECTED
SFP 1 Id:           NOT DETECTED
CLOCK BOARD:        NOT DETECTED
DAUGHTER BOARD:     NOT DETECTED
Power Module 1:     AC DETECTED - Power Good
Power Module 2:     AC DETECTED - Power Good
Board parameters:  PLL: 798.1Mhz
  Internal:    0x30600000,  32 Kbytes @ 266.0Mhz
  Parameter:   0x48000000, 128 Mbytes @ 199.500Mhz
  Packet:      0x50000000, 128 Mbytes @ 199.500Mhz
  Application: 0x00000000, 512 Mbytes @ 133.0Mhz
MAC addresses: [eth0] 00:1F:12:80:72:00
               [eth1] 00:1F:12:80:72:01
               [eth2] 00:1F:12:80:72:02
IP address:      10.100.65.199
Subnet mask:     255.255.255.0
Default gateway: 10.100.65.1
Press ESC Key to enter into Field diagnostics
Active BXOS ...
Starting BXOS...
Starting application/routing stack...
..................
Application/routing stack startup complete.
Applying configuration. Press Ctrl+C to exit...
......
Completed Successfully.
.
BX7000 login: root
Password:
Login incorrect